• Compare
Toggle Nav
Menu
Account
Search
All Categories
My Cart
< Back

XTR2 Frequently Asked Questions

FAQs_Icons-03.png

Smoke Cartridge

The cartridge looks like a Solo ES3 cartridge, is this the same cartridge?
No. Despite their physical similarities XTR2 uses a unique smoke cartridge. The new TES3 cartridge features a larger test capacity providing 800 bursts of smoke and can be purchased in packs of 3 from Detectortesters or your local authorised retailer (Part No. TES3-3PACK-001, TES3-6PACK-001)

 

Can you use the Solo ES3 cartridge in this tester?

Yes. Solo ES3 smoke cartridges can be used in the XTR2 and you would get the same test capacity as when using the cartridge in a Solo 365.

 

Can I use my existing Testifire smoke capsules?
No. XTR2 uses a unique smoke cartridge and is not compatible with older
TS3 capsules

 

How long will my TES3 last if unopened?
The shelf life of TES3 varies depending on the storage conditions it is exposed to. If stored within the recommended temperature range, the shelf life of a TES3 cartridge will extend to several years. The specified range is -10°C to 50°C (+14°F to 122°F)

 

I’ve left my smoke cartridge inserted and not used for a while, will it still work?
Partially used cartridges can continue to be used but may require a manual purge before use

 

Are smoke cartridges re-fillable?
No. Empty smoke cartridges cannot be refilled and should be recycled accordingly to local waste disposal guidelines


How do the cartridges generate smoke?
Fluid is passed over a hot element, vapourizing the fluid into particles mimicking behaviour of real smoke to a detector


Are the TES3 cartridges hazardous?
No. Unlike aerosol smoke cannisters, TES3 cartridges are non pressurised and nonhazardous, supporting safe storage and transportation

 

Why do I need to activate each new cartridge?
Registering each new cartridge using the DT Connect app is essential to ensure optimal performance and smoke quality from your XTR2 device. By registering, the app can configure the cartridge settings to deliver the intended smoke quality for accurate testing. 

We understand that connecting to the DT Connect app may not always be possible at the time of use. Therefore, 10% of the cartridge's total capacity can be used without registration to minimise the risk of poor configuration. However, you will be reminded to register the cartridge each time the device is powered up until the registration is completed. 

part of Noventis Safety group